Buďte u všeho jako první
A blastpot (pressure blaster) with the size of 40, 100 or 200 liters can be used for the mobile blasting. The mobile blasting device is made in two variants – for dry blasting and for wet (dust-free) blasting.
For the dry blasting, a standard blastpot (pressure blaster) on wheels is used, which can be moved as required. The device is provided with a remote switch (dead man control), a pressure governor, a screen and a filter for the breathing helmet of the worker. When the customer needs blast in heights, the device can be provided with a special valve for emptying the hose after the blasting is completed. Then the remaining abrasive cannot fall back into the blastpot.
The dustless blasting (Mist-jet dust-free blasting) is used primarily where the dustiness of the blasting system must be reduced at most. The device is placed in a mobile frame. It is provided with a compressed air cooler, a remote switch (dead man control), a pressure governor, a screen and a filter for the breathing helmet of the worker. It can be used in the following combinations:
1. Wet blasting (use: water current – air)
2. Dry blasting (use: abrasive current – air)
3. Mist-jet dust-free blasting (use: combination of water – abrasive – air)
The device can be optionally provided with a winding frame for hoses.
When required by the customer, the whole mobile blasting device can be integrated directly in the delivery or on a cycle car.
PKIT PRAHA S.R.O.
Tel./Fax: +420 323 605 535
U Hřiště 245
251 01 Světice u Říčan
IČO: 270 88 367
DIČ: CZ270 88 367
Technologie a abraziva
Ing. Petr KUNERT
+420 775 011 320