cz | sk | en

Special offer

přihlášení






I lost my password

Shopping cart: 0,00 €

PKIT

Facebook

Buďte u všeho jako první

Možnosti platby

gopay

Wall-mounted sandblasting robot

PKIT > Product offer > Blasting robot > Wall-mounted sandblasting robot

Wall-mounted sandblasting robot

Wall-mounted sandblasting robot

The wall-mounted robot is an often used robot type. This robot is always attached to the walls of the blasting booth. There are usually two of these robots in the booth; they work on one product at the same time, each of them from one side. So the performance of the whole blasting process increases. The robot is also used in booths with an insufficient inner height where a bridge robot type cannot be installed.

The robot can be programmed in three ways:

  1. PTP programming – it is a point to point programming; before the blasting, the operator enters coordinates from the operating panel, which are saved into memory
  2. Teach-in – programming using a control box; the operator blasts the first product by himself and then he saves the program into memory. For the next (identical) product, the operator selects the corresponding program from the memory
  3. Off-line programming – a program will be created in PC based on the 3D-model of the product and the completed program will be loaded to the control PC through a USB input.

The robot is able to move in 7 axes:

  • Robot rails make possible the upward and downward movement of the robot. It makes possible the robot movement over the whole length of the booth.
  • The robot crab serves for moving the robot telescope up and down and it is placed on travel rails.
  • The robot telescope is a part of the crab and makes possible the rotation in the range of 180°.
  • The flexible arm 1 is a part of the crab and makes possible the upward and downward movement. Its movement range is 175°.
  • The flexible arm 2 is attached to the arm 1 and makes possible the upward and downward movement. Its movement range is 210°.
  • The arm head is attached to the arm 2 and makes possible the rotary movement in the range of 380°.
  • The nozzle is attached to the arm head and makes possible the oscillatory movement of the nozzle, namely in the range of 270°.

 

 

 

 

contact

PKIT PRAHA S.R.O.

Tel./Fax: +420 323 605 535  
E-mail: info@pkit.cz

U Hřiště 245
251 01 Světice u Říčan
Czech Republic

IČO: 270 88 367
DIČ: CZ270 88 367  

Social networks         

ask us

Technologie a abraziva

Ing. Petr KUNERT
+420 775 011 320
kunert@pkit.cz

write to us




Required fields that have to be filled in before sending the message.

© 2003-2013 PKIT Praha s.r.o. Business terms and conditions Frequent questions News archive Web page map

Stránky vytvořilo Viktory design